Nortel CallPilot 201i Hardware Installation page 100

Installing the 201i server in the Succession 1000 system
Media Gateway and
Media Gateway Expansion 3
Physical slot
Media Gateway Expansion
7
8
9
10
Back panel connectors
The following table describes the connectors that are located on the back of
each Media Gateway and Media Gateway Expansion, and how they relate to
CallPilot:
Connector
Four 50-pin amphenol connectors that interface with
the cross-connect terminal
The CallPilot 201i server multi I/O cable must be
connected to the connector that is associated with the
first slot that the 201i server occupies. This is
described in "Connecting cables to the
Succession 1000 system" on page 117.
One auxiliary (AUX) connector
One SDI connector
100
Logical slot
37
38
39
40
Media Gateway and
Media Gateway Expansion 4
Physical slot
Media Gateway Expansion
7
8
9
10
Media
Gateway
yes
yes
yes
Standard 1.07
Logical slot
47
48
49
50
Media
Gateway
Expansion
yes
no
no
CallPilot