Environmental Specifications - Nortel CallPilot 201i Hardware Installation

About the 201i server
Faceplate feature
Network and drive
activity LEDs
(labeled as E, C, I, and S)
Reset button

Environmental specifications

Temperatures
Recommended
temperature
Absolute temperature
Long-term storage
temperature
Short-term storage
temperature
Change rate temperature
Relative humidity
Recommended relative
humidity (RH)
22
Description
The E and C LEDs indicate the presence of network
activity for both the ELAN and CLAN interfaces
(respectively). When they are lit, they indicate that the
interfaces are properly attached to their respective
hubs. When the LEDs are blinking, there is network
activity.
When the I and S LEDs are lit, it means that the IDE
hard drive and SCSI device are being accessed.
The reset hardware was designed for Windows NT and
does not function properly in Windows 2003. Do not
use this button.
15
10
–20
–40
(less than 72 hours)
Less than 1
20% to 55% RH (noncondensing)
° ° °
C (59 F) to 30
° ° °
C (50 F) to 45
° °
C (-4 F) to 60
° °
C (-40 F) to 70
° °
C (34
Standard 1.07
°
C (86 F)
°
C (113 F)
° °
C (140 F)
° °
C (158 F)
F) per 3 minutes
CallPilot