Nortel CallPilot 201i Hardware Installation page 115

November 2006
1 Insert the bottom tabs of the front cover plate inside the bottom rail.
2 Align the screw holes on the front cover plate over the screw heads on
the Media Gateway or Media Gateway Expansion.
3 Slide the front cover plate downward to the right, ensuring that the side
tabs slide behind the side rail.
4 Tighten the screws to secure the front cover plate.
5 Continue with "To replace the front bezel," below.
201i Server Hardware Installation
Installing the 201i server in the Succession 1000 system
115