Nortel CallPilot 201i Hardware Installation page 155

November 2006
Option 11C Mini or Succession 1000 to a screw on the back of the
cabinet
3 Connect the connector on the multi I/O cable that is labeled as ELAN to
the switch network hub.
4 If CLAN is required, connect the connector on the multi I/O cable that is
labeled as CLAN to the CLAN 10- or 100Base-T-compliant network hub
What's next?
Continue with "Connecting the modem" on page 156.
201i Server Hardware Installation
Drain wire
Connecting peripheral devices to the 201i server
G101593
.
155