To Connect The Cd-Rom And Tape Drives To The 201I Server (Option 11C Mini) - Nortel CallPilot 201i Hardware Installation

November 2006
To connect the CD-ROM and tape drives to the
201i server (Option 11C Mini)
1 Connect the first SCSI device.
2 Follow instructions below.
IF the first
device is the
CD-ROM drive
tape drive
3 Connect the low-profile right-angle SCSI cable connector to the SCSI
connector on the 201i server faceplate
4 Connect an additional device in a daisy chain, if required, using either
the SCSI cable supplied with the device or an NTRH3502 cable.
The following diagram shows cable connections, where the CD-ROM
drive is the first device:
201i Server Hardware Installation
Connecting peripheral devices to the 201i server
THEN
do the following:
a. Attach the A0769312 SCSI adapter to the CD-ROM
drive.
b. Connect the NTRH3502 SCSI cable that you
installed earlier on the Option 11C Mini to the SCSI
adapter on the CD-ROM drive.
connect the NTRH3502 SCSI cable that you installed
earlier on the Option 11C Mini to the tape drive.
149