Nortel CallPilot 201i Hardware Installation page 133

November 2006
Succession 1000
For more information about the cabling requirements, see "Installing the
NTRH3502 SCSI cable for Succession 1000" on page 110.
SCSI device cabling for Succession 1000
To Succession 1000
Media Gateway or
Media Gateway
Expansion
CD-ROM drive SCSI
cable NTRH3502
To set device termination
Terminate the SCSI devices as described in the following table:
IF you are connecting
a CD-ROM drive only
201i Server Hardware Installation
Optional
NTRH9038
Tape drive
Tape drive SCSI cable
NTRH3502
NTRH9105
CD-ROM
drive
THEN
set DIP switch 2 on the back of the
CD-ROM drive to ON. This terminates the
drive.
Preparing peripheral devices
G101618
133