November 2006
Step
Description
6
Set the following:
7
Insert the 201i server into two consecutive slots inside the
switch. For instructions, see:
8
Install the MPC cards, if required (see page 140).
201i Server Hardware Installation
SCSI IDs on the CD-ROM and tape drives (see pages
126 and 128)
DIP switches on the CD-ROM drive (see page 126)
device termination on the CD-ROM and tape drives (see
page 130)
large Meridian 1 systems, such as Option 51C (see page
56)
Option 11C or Option 11C Mini (see page 72)
Succession 1000 (see page 107)
Preparing for installation
Check
❒
❒
❒
39