Nortel CallPilot 201i Hardware Installation page 134

Preparing peripheral devices
IF you are connecting
a tape drive only
both a CD-ROM drive and a
tape drive (the tape drive is
the last device)
What's next?
Complete the 201i server installation in the switch. See Chapter 8,
"Connecting peripheral devices to the 201i server."
134
THEN
do nothing.
External termination is not required
because the drive is already internally
terminated. This is indicated by a label on
the back or front of the tape drive.
set DIP switch 2 on the back of the
CD-ROM drive to OFF.
The tape drive is internally terminated.
External termination is not required.
Standard 1.07
CallPilot