Nortel CallPilot 201i Hardware Installation page 98

Installing the 201i server in the Succession 1000 system
The following table identifies the Media Gateway and Media Gateway
Expansion slots into which you can install the CallPilot 201i server:
Unit
Media Gateway
Media Gateway
Expansion
For more information about cards and slots, refer to the Succession 1000
Planning and Installation Guide (NTP 553-3023-210).
Note: When you configure the Succession 1000 system, use the logical slot
numbers shown in the following tables:
Media Gateway and
Media Gateway Expansion 1
Physical slot
Media Gateway
1
2
3
4
5
98
The 201i server
can be installed in
Slots 1 and 2
Slots 2 and 3
Slots 7 and 8
Slots 8 and 9
Slots 9 and 10
Logical slot
11
12
13
Not supported
Not supported
Ineligible slots
Slot 0 is dedicated to the SSC
card.
Slot 4 (includes slots 5 and 6) is
not used.
Slot 10 is a double-wide slot. The
second half of this slot does not
have a backplane connector.
Media Gateway and
Media Gateway Expansion 2
Physical slot
Media Gateway
1
2
3
4
5
Standard 1.07
Logical slot
21
22
23
Not supported
Not supported
CallPilot