Nortel CallPilot 201i Hardware Installation page 51

November 2006
Secondary backplane connector description
The secondary backplane connector is attached to the backplane edge of the
201i server. It consists of the following items:
connector
screws
pin connector (with four pins)
Two pairs of screw holes are provided for connecting the secondary
backplane connector to the 201i server stiffening cage. The outside pair
provides the Meridian 1 spacing. The inside pair provides the Option 11C or
Option 11C Mini spacing.
See the following diagram:
201i Server Hardware Installation
Installing the 201i server in a large Meridian 1 system
Screw Secondary
location for backplane
Meridian 1 connector
Screw location
for Option 11C
Connector
pin socket
Screw location
for Option 11C
Screw location
for Meridian 1
Stiffening
cage
Secondary
backplane
connector
front view
G101443
51