Nortel CallPilot 201i Hardware Installation page 152

Connecting peripheral devices to the 201i server
The following diagram shows cable connections, where the CD-ROM
drive is the first device:
201i cabling
Succession 1000
Media Gateway or
Media Gateway
Expansion
201i
NTRH30AA
CD-ROM drive SCSI
cable NTRH3502
Note: Alternate SCSI device connection scenarios are supported, but
are not depicted in this guide. If you want to use a connection scenario
that is not described in this guide, ensure that you use appropriate
cabling for each SCSI device.
4 Connect the power cord for each device.
5 Power up the devices.
What's next?
Continue with "Connecting the 201i server to the switch, ELAN, and
CLAN" on page 153.
152
Peripheral cabling
Optional
NTRH9038
Tape drive
Tape drive SCSI cable
NTRH3502
SCSI adapter
A0769312
NTRH9105
CD-ROM
drive
G101615
Standard 1.07
CallPilot