Nortel CallPilot 201i Hardware Installation page 137

November 2006
Monitor, keyboard, and mouse
Connect the monitor, keyboard, and mouse to the 201i server faceplate so
that you can:
observe the 201i server startup process.
run the Configuration Wizard.
perform initial administration after installation.
The 201i server is not intended to operate with permanent monitor,
keyboard, and mouse connections. Once you have successfully started and
configured the 201i server, remove the monitor, keyboard, and mouse. For
day-to-day administration, use a web browser on a PC that is connected to
the ELAN or CLAN.
Modem
The modem must be connected to the 201i server if:
you want to administer the 201i server from a remote location.
you need assistance from Nortel technical support.
201i Server Hardware Installation
Connecting peripheral devices to the 201i server
137