Chapter 5 Installing The 201I Server In An Option 11C Or Option 11C Mini; Installing The 201I Server In The Option 11C Or Option 11C Mini Switch - Nortel CallPilot 201i Hardware Installation

Chapter 5
Installing the 201i server in an Option
11C or Option 11C Mini
In this chapter

"Installing the 201i server in the Option 11C or Option 11C Mini switch"

(page 55)
"Section A: Installing Option 11C cables" (page 58)
"Installing the intermediate SCSI cable for Option 11C" (page 58)
"Section B: Installing Option 11C Mini cables" (page 63)
"Installing the NTRH3502 SCSI cable for Option 11C Mini" (page 63)
"Installing cables on the back of the Option 11C Mini cabinet" (page 68)
Installing the 201i server in the Option 11C or Option 11C Mini switch
Introduction
The 201i server occupies physical and electrical slots. The 201i server must
be installed in two peripheral equipment slots as follows:
Switch
Option 11C
Option 11C Mini
Copyright © 2007, Nortel Networks
.
Eligible slots
Slots 1 through 9 in any cabinet
A pair of consecutive slots in any cabinet
Note: You cannot install the 201i server in
slots 0 or 4, because these slots are dedicated
to other cards. For more information about
cards and slots, refer to the Option 11C Mini
documentation.
Nortel CallPilot
201i Server Hardware Installation
NN44200-301 01.01 Standard
5.0 15 February 2007
55
Nortel Networks Confidential