Check Front Fork; Front Brake Lever Adjustment; Rear Brake Pedal Adjustment - MOTO GUZZI V7 III Manual

Check front fork (03_05)

Operating the front brake lever, press the handlebar repeatedly to send the fork fully
down. The shock absorber should compress and extend smoothly with no signs of oil
leakage on the stanchions.
Check the tightening of all the elements and the correct operation of the front and rear
suspension joints.
IMPORTANT
TO HAVE THE FRONT FORK OIL AND OIL SEALS REPLACED, CONTACT AN
03_05
Authorised Moto Guzzi Dealer.

Front brake lever adjustment (03_06)

The clearance between the end of the brake lever and the brake master cylinder can
be checked at the point indicated in the figure.
The clearance should be 0.08 in (2 mm).
IMPORTANT
IF THE FRONT BRAKE LEVER MUST BE REMOVED, CHECKED AND CHANGED
BY AN Authorised Moto Guzzi Dealership
03_06

Rear brake pedal adjustment

IMPORTANT
TO REMOVE AND REPLACE THE REAR BRAKE PEDAL, CONTACT an official
Moto Guzzi Dealer
82