Initializing the Job Macro and Fax Transmission and Reception Data
You can restore the equipment settings to the factory default settings.
Note
When you initialize the equipment settings, the following data is deleted.
Stored documents in the Fcode bulletin board box
Fax jobs that have not been sent
Fax jobs received in the Fcode confidential box
Registered job macros
Dialing logs
E-mail logs
1.
Press
(SETTING).
2.
Press
to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press
to select [Management], and then press
6.
Press
to select [Reset Settings], and then press
7.
Check that [Execute] is selected, and then press
The "If executed, this machine will automatically reboot" message is displayed. Select [Yes] to continue.
(OK).
(OK).
(OK).
(OK).
(OK).
1116