Fuji Xerox ApeosPort-V 5070 Administrator's Manual page 507

Error Code
021-542 [Cause] An error occurred in the machine.
021-543
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
021-545 [Cause] An error occurred while connecting to the EP system via the Internet.
[Remedy] Confirm the contract period of the EP system. When the error is displayed during the
contract period, contact our Customer Support Center.
021-565 [Cause] 3G connection by way of 3Gnet-BOX was lost due to the time-out.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
021-566
[Cause] 3G communication by way of 3Gnet-BOX is out of communication range.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
021-567
[Cause] An error occurred in the SIM card which had been inserted to the 3Gnet-BOX.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
021-568
[Cause] The time synchronization with 3Gnet-BOX was failed.
[Remedy] Adjust the time on the clock of the machine to the right time. If you still have the
problem, switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the same message is displayed again, contact our
Customer Support Center.
021-569 [Cause] USB connection with 3Gnet-BOX was failed.
[Remedy] Check the USB cable of 3G net-BOX to see if it has come off. Connect the cable firmly if
it is unplugged. If you still have the problem, switch off the machine power, make sure
that the touch screen is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support Center.
021-570 [Cause] 3G communication by 3Gnet-BOX was failed to start due to an error which had occurred
in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
021-571 [Cause] An error occurred in the machine through the 3G communication by way of 3Gnet-BOX.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
021-572 [Cause] An error occurred in the communication library of 3G communication by way of 3Gnet-
BOX.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
021-573 [Cause] An error occurred in 3Gnet-BOX.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
Cause and Remedy
Error Code
15
507