Fuji Xerox ApeosPort-V 5070 Administrator's Manual page 526

15 Problem Solving
Error Code
033-502 [Cause]
[Remedy] Confirm the recipient, and then execute the operation again. Also, confirm the
033-503 [Cause]
[Remedy] The remote machine may cancel sending a fax or this machine may receive not a fax
033-504 [Cause]
[Remedy] If this error occurred when sending a fax, execute the operation again.
033-505
[Cause]
[Remedy] Confirm the recipient, and then execute the operation again. If receiving, ask the sender
033-506 [Cause]
[Remedy] The job may have been canceled at the recipient. If the job was not canceled, check
033-507 [Cause]
[Remedy] Confirm the recipient's machine (memory is full, machine is being maintained, or other
033-508 [Cause]
[Remedy] Ask the other party to prepare polling documents, and execute the operation again.
033-509
[Cause]
[Remedy] Execute the operation again. If the error still is not resolved, confirm the condition of the
033-510 [Cause]
[Remedy] Confirm the condition of the line and the other machine, and execute the operation
033-511 [Cause]
[Remedy] Confirm the following conditions:
033-512 [Cause]
[Remedy] Confirm whether the other party can execute Relay Broadcast.
033-513 [Cause]
15
[Remedy] Confirm whether the other machine has the Folder feature.
033-514 [Cause]
[Remedy] Ask the sender to send again.
033-516 [Cause]
[Remedy] Confirm the recipient, and then execute the operation again. If receiving, ask the sender
526
Cause and Remedy
A response is not received for the fax.
recipient's machine (memory is full, machine is being maintained, or other conditions),
and execute the operation again.
An error occurred during a fax job and the communication is canceled.
job but a phone call. Check the situation of the remote machine.
An error occurred during fax transmission and the communication was terminated.
If this error occurred when receiving a fax, ask the sender to send again.
An error occurred during fax transmission.
to send again.
Communication was terminated at the recipient's machine.
whether the other machine has a problem, and execute the operation again.
The recipient's machine cannot receive.
conditions), and execute the operation again.
No spooling documents exist at the other machine.
An error occurred during fax transmission.
other machine.
An error occurred during fax transmission.
again.
An error occurred during fax transmission.
Whether a polling document exists at the other machine
Whether a document is jammed at the other machine
Whether the passwords match
The other party cannot execute Relay Broadcast.
The other machine does not have the Folder feature.
An error occurred during fax transmission.
An error occurred during fax transmission.
to send again.