Fuji Xerox ApeosPort-V 5070 Administrator's Manual page 223

Re-enter Broadcast Recipients
This setting is required when you selected [Enter Twice] for [Re-enter Recipients]. Set
whether or not to allow the Broadcast Send.
Enter Once Only
Allows the Broadcast Send. No need to re-enter the recipient.
Enter Twice
Allows the Broadcast Send. Re-entering the recipient is required.
Broadcast Disabled
No Broadcast Send is allowed.
Re-enter Speed Dial Recipients
This setting is required when you selected [Enter Twice] for [Re-enter Recipients]. Select how
to re-enter a recipient after the first entry.
Enter Once Only
No need to re-enter the recipient.
Enter Twice
Use the Speed Dial feature to re-enter the recipient.
Re-enter Fax Number or E-mail
You cannot enter the speed dial when you re-enter the number or address. Use the fax
number, SIP user ID (Sign-in Name), phone number or SIP user name for IP fax, or e-mail
address to enter the recipient.
Re-enter Group Recipients
Specifies whether you need to re-enter group addresses after entering a group address.
Group Send Disabled
No group recipient is allowed.
Enter Once Only
No need to re-enter the group recipient.
Enter Twice
Re-entering the group recipient is required.
Broadcast Checkbox on 1st Tab
Specify whether or not to show the [Enable Broadcast] checkbox in the [Fax/Internet Fax]
screen to explicitly express broadcast directions.
Chain Dial
Allows you to combine the fax numbers registered in speed dial and address book
respectively and the numbers entered using the numeric keypad to specify as one recipient.
You can select from [No] or [Yes].
Note • This item is available when [Type 1] is set for [Address Book Type] under [Tools] > [Address Book
Manual Redial List - Saved Entries
Specify the number of redial destinations saved.
Settings].
Fax Service Settings
5
223