Fuji Xerox ApeosPort-V 5070 Administrator's Manual page 480

15 Problem Solving
Error Code
018-406 [Cause]
[Remedy] Set different IP addresses to each Ethernet. When setting the same IP address to each
018-407 [Cause]
[Remedy] Set different IP addresses to each Ethernet. When setting the same IP address to each
018-408 [Cause]
[Remedy] Change the IPv4 address of Ethernet2.
018-409 [Cause]
[Remedy] Change the IPv6 address of the network in which the address already exists.
018-410 [Cause]
[Remedy] Check whether the IP address of the DNS server is set correctly.
018-411 [Cause]
[Remedy] Check whether the IP address of the DNS server is set correctly.
018-412
[Cause]
018-413
[Remedy] Change the IPv6 address of the network in which the address already exists.
018-414 [Cause]
[Remedy] Set the IP address correctly.
018-415 [Cause]
[Remedy] Change the [Manually Configured IPv6 Address] on the machine, or the IP address of
018-416 [Cause]
[Remedy] Change the IPv6 address of the network in which the address already exists.
018-500 [Cause]
[Remedy] Configure the server certificate. Or, cancel authentication.
018-501 [Cause]
[Remedy] Check the network connection and the address of the CA server.
018-502 [Cause]
[Remedy] Confirm the property information for the specified user, and check whether the
15
018-503 [Cause]
018-504
[Remedy] Execute the authentication operation again.
480
Cause and Remedy
The machine detects the identical IPv4 addresses when Ethernet1 and Ethernet2 are
connected to different network and the setting of identical addresses is prohibited.
Ethernet, contact our Customer Support Center.
The machine detects the identical IPv6 addresses when Ethernet1 and Ethernet2 are
connected to different network and the setting of identical addresses is prohibited.
Ethernet, contact our Customer Support Center.
The IPv4 address already exists in the network of Ethernet2.
The IPv6 address already exists in the network of Ethernet2.
Updating of the IPv4 address and host name for the DNS server failed on the network
of Ethernet2.
Updating of the IPv6 address and host name for the DNS server failed on the network
of Ethernet2.
The IPv6 address already exists in the network of Ethernet2.
IP address for IPv6 set manually in Ethernet2 is incorrect.
IP address for IPv6 set manually in Ethernet2 is incorrect.
IPv6 on the network device, to remove the duplication of addresses.
The IPv6 address already exists in the network of Ethernet2.
The certificate does not exist in the authentication server.
Communications with the CA server set in the machine failed.
The machine failed to transfer data using SMB of the Scan to PC service because
computers allowed to login are restricted.
computers allowed to login to the server are restricted.
Communications with the CA server set in the machine failed.