Fuji Xerox ApeosPort-V 5070 Administrator's Manual page 592

16 Appendix
Original Size
Paper Weight
Capacity
Feeding Speed
Finisher-B1 (Optional)
Type
Paper Size/Paper Weight
Paper Capacity
Staple
Punch
16
590
Maximum: A3, 11 x 17"
Minimum: A5*
* : For non-standard size paper: 125 x 85 mm
38 - 128 gsm (2-sided: 50 - 128 gsm)
130 sheets
Important • When using 80 gsm paper
<ApeosPort-V 5070, DocuCentre-V 5070>
55 pages/minute (A4 1-sided)
<ApeosPort-V 4070, DocuCentre-V 4070>
46 pages/minute (A4 1-sided)
Sorting (Offset available)/Stacking (Offset available)
Paper Size
Maximum: A3, 11 x 17"
Minimum: B5
Paper Weight
60 - 216 gsm (56 - 216 gsm when the HCF Kit (optional) is installed.)
Without Stapling
A4: 2000 sheets; B4 or larger: 1000 sheets; Mixed Size Stacking*1 : 300
sheets
With Stapling
A4: 100 copies or 1000 sheets
*3
With Booklet Finisher
50 copies or 600 sheets
*3
With Scoring
500 sheets
Important • When using 80 gsm paper
*1 : When larger size sheets are stacked on top of smaller size sheets.
*2 : 75 sets or 750 sheets with dual stapling.
*3 : The Booklet Finishing function requires the Booklet Maker Unit for Finisher-B1. After a job
with the Booklet Finishing function specified has been output, the next job may not be
delivered until the sheets are removed from the output tray. Also, if larger size sheets are
stacked on top of smaller size sheets after a job with the Booklet Finishing function
specified has been run, the next job may not be delivered until the sheets are removed
from the output tray.
Capacity
50 sheets (90 gsm or less)
Paper Size
Maximum: A3, 11 x 17"
Minimum: B5
Position
Single stapling (Front/Angled, Back/Straight), Dual stapling (Parallel)
Number of Holes
2-hole / 4-hole punch or 2-hole / 3-hole punch (US Specifications)
Paper Size
A3, 11 × 17", B4, A4*, A4 , Letter*, Letter , B5
* : 3-hole punching is not supported for these paper sizes.
Paper Weight
60 to 200 gsm
*2
, B4 or larger: 75 copies or 750 sheets