Fuji Xerox ApeosPort-V 5070 Administrator's Manual page 497

Error Code
018-796 [Cause] An LDAP server protocol error occurred as a result of the Address Book operation. The
server returned RFC2251 Result Message No "96" (client loop detected) for Address
Book query.
[Remedy] Have your network administrator confirm the LDAP server status.
018-797 [Cause] An LDAP server protocol error occurred as a result of the Address Book operation. The
server returned RFC2251 Result Message No "97" (referral limit exceeded) for Address
Book query.
[Remedy] Have your network administrator confirm the LDAP server status.
021-210 [Cause] An error occurred in the IC Card Reader (optional).
021-211
[Remedy] Check the connection between the IC Card Reader and the machine. Switch off the
021-212
machine power, make sure that the touch screen is blank, and then switch on the
machine power. If the error still is not resolved, the IC Card Reader may be defective.
Connect an unbroken IC Card Reader and execute the operation again.
021-213 [Cause] There is a problem with the unit price table settings for the related product.
[Remedy] The system administrator should exports the unit price table and modify it using
CentreWare Internet Services. Set a number from 1 to 9,999,999 and import the table
modified to the machine.
021-214 [Cause] An error occurred during encrypted communication between the machine and the USB
memory device.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
021-215 [Cause] The accounting/billing device connected does not match the device set on the machine.
[Remedy] Change the setting on the machine or connect the correct accounting/billing device,
and switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power.
021-360 [Cause] An error occurred.
021-361
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
021-401 [Cause] The number of authentication devices such as IC Card Reader (optional) connected
exceeds the setting value.
[Remedy] Disconnect the authentication device connected.
021-402 [Cause] The address of the proxy server name is incorrect.
[Remedy] Check the followings:
If the error still is not resolved after checking the above settings, there may be a network
failure or the proxy server settings may be changed or failed. Consult your system
administrator.
If the network works normally but the error still is not resolved, contact our Customer
Support Center.
Cause and Remedy
LAN cable connection
DNS server address setting
The default gateway setting
The subnet mask setting
Error Code
15
497