Fuji Xerox ApeosPort-V 5070 Administrator's Manual page 189

DHCP
The SIP proxy server IP address and the SIP registrar server IP address will be automatically
retrieved from DHCP.
DHCP v6
The IPv6 address for the SIP proxy server and the IPv6 address for the SIP registrar server
will be automatically retrieved from the DHCPv6 server.
STATIC
Allows you to manually enter the IP addresses for the SIP proxy server and the SIP registrar
server.
SIP Proxy Server Setup
Configure SIP proxy server settings. You can set a primary server and a secondary server.
Note • You can use up to two SIP proxy servers.
• Select [Cisco] for a server type.
Primary Server - IP Address
Enter the IP address of the primary server. Up to 255 characters are allowed. You can specify
the addresses by IPv4 address, IPv6 address, and FQDN.
Primary Server - Port Number
Set the primary server port number from 1 to 65535.
The default value is 5060.
Primary Server - Login User Name
Enter the login user name of the primary server. Up to 31 characters are allowed.
Primary Server - Login Password
Enter the login password of the primary server. Up to 31 characters are allowed.
Primary Server Type
Select the type of primary server from [Standard] or [Cisco].
Secondary Server - IP Address
Enter the IP address of the secondary server. Up to 255 characters are allowed. You can
specify the addresses by IPv4 address, IPv6 address, and FQDN.
Secondary Server - Port Number
Set the secondary server port number from 1 to 65535.
The default value is 5060.
Secondary Server - Login User Name
Enter the login user name of the secondary server. Up to 31 characters are allowed.
Secondary Server - Login Password
Enter the login password of the secondary server. Up to 31 characters are allowed.
Secondary Server Type
Select the type of secondary server from [Standard] or [Cisco].
Connectivity & Network Setup
189
5