Fuji Xerox ApeosPort-V 5070 Administrator's Manual page 471

Error Code
016-757 [Cause] The passcode is incorrect.
[Remedy] Enter the correct passcode.
016-758 [Cause] The division does not have permission to use the service.
[Remedy] Consult your system administrator.
016-759 [Cause] The number of pages reached the maximum number of pages for this service.
[Remedy] Consult your system administrator.
016-760 [Cause] An error occurred during PostScript (optional) processing.
[Remedy] Take one of the following measures:
For more information on [Image Quality], refer to the help of the print driver. For more information on memory, refer to
"Allocate Memory" (P.204).
016-761
[Cause] An error occurred during image processing.
[Remedy] Set [Image Quality] to [Standard] and execute the operation again. If the error still is
not resolved, set [Print Page Mode] to [On].
016-762
[Cause] The specified printer language is not installed on the machine.
[Remedy] For [Parallel] and [USB] in [Print Mode] under [Port Settings], specify correct printer
language.
016-763 [Cause] Unable to connect to the POP server.
[Remedy] Confirm the POP server IP address set on the machine.
016-764 [Cause] Unable to connect to the SMTP server.
[Remedy] Consult the SMTP server administrator.
016-765 [Cause] Unable to send the e-mail because the hard disk on the SMTP server is full.
[Remedy] Consult the SMTP server administrator.
016-766 [Cause] An error occurred on the SMTP server.
[Remedy] Consult the SMTP server administrator.
016-767
[Cause] Unable to send the e-mail because the address is not correct.
[Remedy] Confirm the address, and try sending again.
016-768 [Cause] Unable to connect to the SMTP server because the machine's mail address is incorrect.
[Remedy] Confirm the machine's mail address.
016-769
[Cause] The SMTP server does not support delivery receipts (DSN).
[Remedy] Send e-mail without setting delivery receipts (DSN).
016-770 [Cause] Direct Fax is restricted.
[Remedy] Consult your system administrator whether Direct Fax is available. If it is available,
contact our Customer Support Center.
016-772 [Cause] The DNS server address is not set.
[Remedy] Set the DNS server address.
016-774
[Cause] Unable to process compression conversion because of insufficient hard disk space.
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
016-775 [Cause] Unable to process image conversion because of insufficient hard disk space.
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
Cause and Remedy
Set [Image Quality] to [High Speed].
Increase PostScript memory.
Error Code
15
471