C Fold Position Adjustment - Fuji Xerox ApeosPort-V 5070 Administrator's Manual

Note • When you configure settings under [System Settings] or [Setup] and then press the <Services Home>

C Fold Position Adjustment

Adjust the C fold position.
1
Select [C Fold - A4
and then select [Change Settings].
2
Select [Sample Printout].
3
Select the tray in which you loaded paper, and
press the <Start> button.
The sample is printed.
4
Select [Close].
5
Check the sample printout, measuring the A
and B fold position movement amounts.
6
Enter the values you measured in step 5 in
[Values A & B Before Adjustment], and the
value to which to adjust in [Desired Values A &
B].
Important • Set value A and value B so that an edge of
7
Select [Adjust].
8
Select [Sample Printout] again.
9
Select the tray in which you loaded paper and press the <Start> button.
The sample is printed.
10
Select [Save].
button, the screen directly goes back to the Services Home screen.
] or [C Fold - 8.5x11"
the paper does not extend beyond a fold
position of the paper. Extending an edge of
paper beyond a fold position of the paper
may cause a paper jam.
Fold Position Adjustment
],
16
605