Fuji Xerox ApeosPort-V 5070 Administrator's Manual page 453

Error Code
003-795 [Cause] When enlarging/reducing a scanned document to the paper size specified, the
reduction/enlargement ratio exceeds the allowed range.
[Remedy] Take one of the following measures:
005-275 [Cause] An error occurred in the document feeder.
005-280
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
010-310 [Cause] An error occurred in the machine.
010-314
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
010-315
on the machine power. If the error still is not resolved, contact our Customer Support
010-319 Center.
010-320
010-325
010-327
010-379
010-398
011-310 [Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
012-210 [Cause] Finisher malfunction
012-211
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
012-212
on the machine power. If the error still is not resolved, contact our Customer Support
012-213 Center.
012-221
012-223
012-224
012-225
012-226
012-227
012-228
012-229
012-230
012-231
012-232
012-233
012-234
012-243
012-246 [Cause] The Booklet Maker is not fully inserted completely into the Finisher.
[Remedy] Completely insert the Booklet Maker into the Finisher, and turn the machine off and
then on.
Cause and Remedy
Manually enter a reduction/enlargement ratio.
Change the paper size.
Error Code
15
453