Fuji Xerox ApeosPort-V 5070 Administrator's Manual page 537

Error Code
073-211 [Cause] An error occurred in Tray 3.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
074-210 [Cause] Tray 4 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the machine
power, make sure that the touch screen is blank, and then switch on the machine power.
If the error still is not resolved, contact our Customer Support Center. You can use a tray
other than Tray 4.
074-211 [Cause] An error occurred in Tray 4.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
077-211 [Cause] Detected the installation of a tray of a different type than expected.
[Remedy] Contact our Customer Support Center.
077-213
[Cause] An error occurred in the Duplex Module of the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
077-310
[Cause] An error occurred in the machine.
077-329
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
078-212
[Cause] An error occurred in the High Capacity Feeder.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
078-219 [Cause] An error occurred in Tray 6 (HCF B1) (optional).
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
078-250 [Cause] An error occurred in Tray 6 (HCF B1) (optional).
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
081-799 [Cause] [Fax Transfer from Address Book] is set to [On], but the fax numebr of the forwarding
destination is not registered in the Address Book.
[Remedy] Register the fax number of the forwarding destination in the Address Book, or set [Fax
Transfer from Address Book] to [Off].
091-314 [Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
091-328 [Cause] An error occurred in the drum cartridge.
[Remedy] Reinstall the drum cartridge or replace the drum cartridge with a new one. If the error
still is not resolved, contact our Customer Support Center.
Cause and Remedy
Error Code
15
537