Gearcase Assembly - Polaris 2013 RANGER RZR S Service Manual

FINAL DRIVE

Gearcase Assembly

1. Install a new input shaft seal using a standard seal
installer or other suitable method.
2. Install new seals on each side of gearcase housing
using a standard seal installer. Apply a thin coat of
case sealant (2871557) to gearcase mating surfaces
upon cover installation.
7.40
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
3. If removed, install each axle spool bearing race using
standard bearing installation tools and an arbor press.
Wear the appropriate safety equipment while
installing bearing races to
reduce the risk of injury.
WARNING