DRIVEN CLUTCH SERVICE (NON-EBS)
Exploded View
Stationary
Secondary Sheave
Clutch Disassembly / Inspection
CAUTION
Wear eye protection when removing snap ring to
prevent serious personal injury.
Use caution when removing, the snap ring
pressure is loaded by the compression spring.
1. Remove driven clutch from transmission input shaft.
2. Mark the position of the clutch sheaves before
disassembly or use the X's on the sheaves for
reference. This aids in reassembly and maintains
clutch balance after reassembly.
Spring Retainer
Moveable
Secondary Sheave
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
Inner
3. Place the driven clutch into the Universal Clutch
Compressor PU-50518. Apply and hold downward
pressure on the outer spring retainer. Carefully
remove the snap ring. Remember the outer spring
retainer contains strong spring pressure.
Remove Snap Ring
Outer Spring Retainer
NOTE: Spring is compression only and has no
torsional wind.
CLUTCHING
Compression Spring
Spacer
Outer
Spring Retainer
Retaining
Ring
6
6.21