Shock Compression Adjustment - Polaris 2013 RANGER RZR S Service Manual

MAINTENANCE

Shock Compression Adjustment

The compression damping adjustment is located on top of
the shock 'Piggyback' reservoir of each shock.
Turn the clicker adjuster knob to make damping
2
adjustments.
NOTE: When the clicker adjuster is turned
clockwise until it stops, the damping is in the fully
closed position.
Turn the clicker clockwise to increase compression
damping. Turn the clicker counter-clockwise to decrease
compression damping.
NOTE: The factory setting is 10 clicks from closed.
Refer to the "Compression Adjustment Table"
below.
Compression Adjustment Table
Setting Compression Damping
Softest Full counter-clockwise position
Factory 10 clicks from closed
Firmest 2 clicks from closed
Increase Decrease
Damping Damping
Clicker
Adjuster
RZR 4 L.E.
Shown
2.37
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.