Polaris 2013 RANGER RZR S Service Manual page 342

TRANSMISSION
12. With the transmission in neutral, lubricate and install
thrust washer, drum gear, plate, springs, contact pins
and gear position sensor/O-ring assembly. Verify the
contact pins are aligned as shown with transmission
in neutral. Torque retaining screws to specification.
Apply Lubricant to shift drum components.
Gear Position Sensor Screws:
25-40 in-lbs (3-5 Nm)
13. Complete the shift detent screw installation. Torque
the outer detent screws to specification.
Outer Detent Screws:
23-27 ft-lbs (31-37 Nm)
8.18
Neutral
=
= T
= T
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
14. Install reverse idler lower washer, needle bearing,
gear, upper washer and retaining ring onto idler shaft.
15. Install a new shaft bearing (if required).
16. Install the park flange and torque the (5) screws to
specification.
Park Flange Screws:
130-155 in-lbs (15-18 Nm)
= T