Polaris 2013 RANGER RZR S Service Manual page 233

27. Use the Top Fill Shock Fill Tool to charge the shock
to specification. Charge the shock for approximately
10 seconds (Fig. 27). During the charging process,
the shock rod must extend outwards.
Figure 27
28. Inspect both ends of the shock assembly for leaks.
29. Slide the shock body cap down to the body. Use a soft-
faced hammer to drive the cap into the shock body
(Fig. 28).
Figure 28
30. Install the body cap and eyelet spherical bearings
using an arbor press. Install the spiral rings on both
sides of the spherical bearings.
NOTE: After installation, be sure to RIDE SLOWLY
initially to ensure the shock and the vehicle's
suspension is performing correctly.
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
BODY / STEERING / SUSPENSION
5
5.69