Rear Gearcase; Gearcase Removal - Polaris 2013 RANGER RZR S Service Manual

Hide thumbs Also See for 2013 RANGER RZR S:

Table of Contents

REAR GEARCASE

1. Drain the fluid from the rear gearcase and remove the

rear drive shafts from each side of the rear gearcase.

See "REAR DRIVE SHAFT" on page 7.29

2. Remove the exhaust pipe and exhaust silencer to

allow for gearcase removal.

3. RZR S Only: Remove the upper A-arm bolts, lower

rear A-arm bolts, and suspension plate. NOTE: If

accessory rear rack cab frame is installed, remove

the (4) bolts retaining it to the rear suspension

plate (see photo).

9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual

4. Remove the (2) rear gearcase mount bracket

fasteners and mount bolt and remove bracket from

5. Remove the fasteners and bracket that secure the

rear gearcase to the transmission.

6. Remove the (4) fasteners and remove the rear mount

from the rear gearcase.

Table of Contents

2013 ranger rzr 4