Pre-Ride - 50 Hour Maintenance Interval - Polaris 2013 RANGER RZR S Service Manual

MAINTENANCE

Pre-Ride - 50 Hour Maintenance Interval

Item
 Steering
 Front / Rear Suspension
Tires
 Brake Fluid Level
 Brake Pedal Travel
Brake Systems
Wheels / Fasteners
Frame Fasteners

Engine Oil Level
E

Air Filter
E
Coolant Level
Head Lamp / Tail Lamp

Air Filter
E

Brake Pad Wear

Battery

Engine Breather Filter
E (if equipped)
Engine Oil Change 

E (Break-In Period)
Front Gearcase Oil 

(Demand Drive Plus)
Rear Gearcase Oil 

(ATV Angle Drive Fluid)
Transmission - Main

(AGL Gearcase Lubricant)
Transmission - Transfer

(AGL Gearcase Lubricant)
 General Lubrication
Shift Linkage
 Steering
 Front / Rear Suspension

Throttle Cable / Throttle Pedal
E
Throttle Body Air Intake Ducts
E
/ Flange
Cooling System
Perform these procedures more often for vehicles subjected to severe use.
E Emission Control System Service (California)
 Have an authorized Polaris dealer perform these services.
2.4
Maintenance Interval
(whichever comes first)
Hours Calendar
- Pre-Ride
- Pre-Ride
- Pre-Ride
- Pre-Ride
- Pre-Ride
- Pre-Ride
- Pre-Ride
- Pre-Ride
- Pre-Ride
- Pre-Ride
- Daily
- Daily
- Weekly
10 H Monthly
25 H Monthly
25 H Monthly
25 H 1 M
25 H 1 M
25 H 1 M
25 H 1 M
25 H 1 M
50 H 3 M
50 H 6 M
50 H 6 M
50 H 6 M
50 H 6 M
50 H 6 M
50 H 6 M
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
Miles
(KM)
-
-
-
-
Make adjustments as needed. 
-
See Pre-Ride Checklist on Page 2.10.
-
-
-
-
- Inspect; replace as needed
- Check level daily, change coolant every 2 years
Check operation; apply dielectric grease if
-
replacing
- Inspect; replace as needed
100 (160) Inspect periodically
250 (400) Check terminals; clean; test
250 (400) Inspect; replace if necessary
Perform a break-in oil change after the first 25
250 (400)
hours or one month of operation
Initial fluid level inspection; add lubricant if
250 (400)
needed
Initial fluid level inspection; add lubricant if
250 (400)
needed
Initial fluid level inspection; add lubricant if
250 (400)
needed
Initial fluid level inspection; add lubricant if
250 (400)
needed
500 (800) Lubricate all fittings, pivots, cables, etc.
500 (800) Inspect, lubricate, adjust
500 (800) Lubricate
500 (800) Lubricate
500 (800) Inspect; adjust; lubricate; replace if necessary
500 (800) Inspect ducts for proper sealing / air leaks
Inspect coolant strength seasonally; pressure
500 (800)
test system yearly
Remarks