Exploded View (Rzr 4); Shock Removal / Installation; Shock Replacement - Polaris 2013 RANGER RZR S Service Manual

Exploded View (RZR 4)

Retainer gap
should be 180°
from spring end

Shock Removal / Installation

1. Elevate the vehicle off the ground to relieve the
suspension load.
2. Remove the upper and lower fasteners retaining the
shock and remove the shock from the vehicle.
3. Reverse the procedure to reinstall the shock. Torque
new fasteners to specification (refer to exploded
views).
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
BODY / STEERING / SUSPENSION

Shock Replacement

1. Using a spring compressor, compress the shock
spring far enough to remove the spring retainer.
Shock Spring
Compressor Tool
2870623
2. Remove the spring and adjusting cam from the
existing shock and install components onto the new
shock.
3. Compress the shock spring and install the spring
retainer.
IMPORTANT: The spring retainer gap should be 180°
from the end of the spring upon installation.
4. Reinstall the shock onto the vehicle and torque new
fasteners to specification (refer to exploded views).
5
5.47