Rear Bumper; Hood And Front Body Work - Polaris 2013 RANGER RZR S Service Manual

Rear Bumper

1. Remove the (4) Torx screws retaining the upper
portion of the rear bumper to the cargo box.
2. Remove the (4) Torx screws retaining the lower
portion of the rear bumper to the frame.
3. Remove the (2) fasteners retaining the middle portion
of the rear bumper to the cargo box.

Hood and Front Body Work

Hood Removal
1. To remove the hood, turn both latches to disengage
the rear portion of the hood.
2. Tilt the hood back to disengage the front tabs and
remove the hood from the vehicle.
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
BODY / STEERING / SUSPENSION
Front Body / Dash Removal
1. Remove the hood as previously described.
2. Remove the front bumper (see "BODY COMPONENT
REMOVAL - Front Bumper").
3. Remove the front portion of the cab frame assembly
to allow dash removal. Refer to appropriate "CAB
FRAME - Assembly / Removal" procedure for
assembly torque specifications.
RZR / RZR S Shown
4. Remove the push rivets that attach the dash assembly
to the rocker panels on each side.
RZR / RZR S Shown
5. Remove the (2) Torx screws and (2) push rivets that
retain the front and rear of the dash assembly.
Push
Rivets
Remove
5
Torx
Screws
5.21