Front Stabilizer Bar (Rzr / Rzr S Int'l); Stabilizer Bar Linkage Removal; Stabilizer Bar Removal; Exploded View - Polaris 2013 RANGER RZR S Service Manual

BODY / STEERING / SUSPENSION

FRONT STABILIZER BAR (RZR / RZR S INT'L)

Stabilizer Bar Linkage Removal

1. Elevate and safely support the front of the vehicle.
2. Remove the lower shock mounting fastener from the
upper A-arm on each side of the vehicle (see

"Exploded View").

3. Remove the upper portion of the linkage from the
stabilizer bar on each side of the vehicle (see
"Exploded View"):
• RZR: Remove the nut and linkage bushings, and
remove the linkages from the vehicle.
• RZR S INT'L: Remove the bolts that attach the
upper portion of the linkages to the stabilizer bar
clamps and remove the linkages from the vehicle.
4. Inspect the linkage assemblies for signs of excessive
wear or damage. Replace linkage assembly if
damaged.
5. Reverse the procedure for installation. Torque the
linkage fasteners to specification (see "Exploded
View").

Stabilizer Bar Removal

1. If stabilizer bar linkages are installed:
• RZR: Remove the nut and linkage bushings (see
"Exploded View").
• RZR S INT'L: Remove the bolts that attach the
upper portion of the linkages to the stabilizer bar
clamps (see "Exploded View").
2. Remove the hood and front bumper (see "BODY
COMPONENT REMOVAL").
3. Remove the (4) T30 Torx fasteners retaining the front
bumper support to the frame.
Main
Frame
NOTE: Properly support the bumper support and
wires that are attached.
5.38
T30
Screws
Nuts
Bumper
Support
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
4. Remove the (2) upper radiator retaining bolts.
5. Remove the (4) bolts retaining the lower radiator
mount bracket and remove the bracket from the
frame.
6. Allow radiator to sag down to allow access to recovery
bottle retaining screws and filler neck retaining
screws.
7. Remove retaining screws from recovery bottle and
filler neck. Allow the recovery bottle and filler neck to
hang down to access the (4) bolts retaining the upper
radiator mount bracket.
Filler
Neck
Recovery
Bottle