Rider Information Display; Information Display Area - Polaris 2013 RANGER RZR S Service Manual

Hide thumbs Also See for 2013 RANGER RZR S:
Table of Contents

Advertisement

Rider Information Display

The rider information display is located in the instrument
cluster. All segments will light up for 1 second at start-up.
NOTE: If the instrument cluster fails to illuminate, a
battery over-voltage may have occurred and the
instrument cluster may have shut off to protect the
electronic speedometer.
1. Vehicle Speed Display - Analog display of vehicle
speed in MPH or km/h.
2. Information Display Area - Odometer / Trip Meter
/ Tachometer / Engine Temperature / Engine
Hours / Service Info / Clock - LCD display of the
service hour interval, total vehicle miles or km., total
engine hours, a trip meter, engine RPM and engine
temperature.
3. MPH / KM/H Display - MPH is displayed when the
instrument cluster is in the Standard mode. KM/H is
displayed when the instrument cluster is in the Metric
mode.
4. High Beam Indicator LED icon illuminates whenever
the Headlamp switch is in the high beam position.
5. Fuel Level Indicator - LCD bar graph indicating
current fuel level. All segments will flash when the last
segment is cleared indicating a low fuel warning.
6. Clock - Displays current time in either 12-hour or 24-
hour formats.
7. Engine
Temperature
illuminates when the ECM determines the engine is
overheating. The indicators will initially flash to
indicate the engine is overheating. The indicators will
stay lit and not flash if a severe overheating condition
exists.
8. Service Interval Indicator - Preset at the factory and
adjustable by the user, a flashing wrench symbol
alerts the operator that the preset service interval has
been reached and maintenance should be performed.
The wrench icon will flash for 10 seconds upon start-
up once it reaches 0.
9. Check Engine MIL - Illuminated when the ECM has
detected a Diagnostic Trouble Code in the engine
management system.
10. AWD Indicator - Illuminated when the AWD / TURF
switch is in the AWD position.
11. TURF Indicator - Illuminated when the AWD / TURF
switch is in the TURF position (INT'L Models Only).
Indicator
-
LED
icon
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
12. Neutral Gear Indicator - LED icon illuminates when
gear selector is in the neutral (N) position.
13. Gear Position Indicator - Displays gear selector
position.
H = High
L = Low
N = Neutral
R = Reverse
P = Park
-- = Gear Signal Error (shifter stuck between gears)
14. Power Steering System MIL - LED icon illuminates
when a fault has occurred with the power steering
system. This indicator illuminates when the key is
turned to the ON position and goes off when the
engine is started.
15. Turn Signal / Hazard Lamp Indicator - LED icon
illuminates whenever the LH, RH or hazard lamps are
activated (INT'L Models Only).
16. Helmet / Seat Belt Indicator - LED icon illuminates
for several seconds when the key is turned to the ON
position. The lamp is a reminder to the operator to
ensure all riders are wearing helmets and seat belts
before operating the vehicle.

Information Display Area

The LCD portion of the instrument cluster is the
information display area. Information displayed in this
area includes: odometer, trip meter, engine RPM, engine
hours, service interval, clock, engine Diagnostic Trouble
Codes (DTCs) and power steering DTCs.
Odometer
The odometer records and displays the total distance
traveled by the vehicle. The odometer can not be reset.
ELECTRICAL
10
10.13

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 ranger rzr 4

Table of Contents