Polaris 2013 RANGER RZR S Service Manual page 132

ELECTRONIC FUEL INJECTION
5. Remove the special tool and attach an extension to
the torque wrench. Torque the bottom bolt that
attaches the bracket to the rear gearcase through the
hole in the frame support.
Bottom Rear Gearcase Bolt
NOTE: Special Tool is not required for this torque.
6. Using special tool (PA-48873), torque the upper (2)
bolts retaining the mounting bracket to the rear
gearcase. Place the torque wrench through the rear
exhaust silencer opening to gain access to the bolts.
Middle Rear Gearcase Bolt
4.16
Torque with
an extension
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
Upper Rear Gearcase Bolt
7. Torque the remaining bolt that attaches the bracket to
the front side of the rear gearcase.
Front Rear Gearcase Bolt
NOTE: A multi-directional torque wrench is required
in this application because of the limited access to
this bolt. Check with the manufacturer of your torque
wrench to see if it can be used to tighten left-hand
threaded bolts.