MUTOH ValueJet VJ-1204 Operation Manual page 59

VJ-1204 OPERATION MANUAL
e. Press the [+] or [–] key to enter the number that you selected in step c.
f. Press the [Enter] key on the operation panel.
• The set value for Bi-D Quality is registered.
• "Adj.5: Bi-D Quality" is displayed on the operation panel.
9. Register the setting for Bi-D Normal (two-way printing/normal mode) in the same way as in step 8.
10. Press the [Cancel] key on the operation panel several times.
• The operation panel returns to Normal.
• Alignment ends.
3-33
3 Before using