Setup Menu - MUTOH ValueJet VJ-1204 Operation Manual

5 Panel setup menu
5.1

Setup menu

Various settings of the printer are configured.
Setup item
MediaType
Effect
Spitting
Side Margin
Media Initial
Media Width/MediaWidth
Take-up
Origin
Prev. Stick
Head Travel
Multi Strike
Strike Wait
Slant Check
Sets up the media type to print.
• [Enter] key: shifts to the sub menu.
5.1.1 MediaType menu
Sets up the Effect menu.
• [Enter] key: shifts to the sub menu.
5.1.2 Effect menu
Set up the Flushing operation while printing.
• [Enter] key: shifts to the sub menu.
5.1.3 Spitting menu
Specifies the right and left margins of printed media.
• [Enter] key: shifts to the sub menu.
5.1.4 Side Margin menu
Decides whether to detect the width and front edge of the media when
initializing the media.
• [Enter] key: shifts to the sub menu.
5.1.5 Media Initial menu
Specifies the media width between the loading mark and the left end if media
detection is not performed during media initialization.
Displays the detected media width if media detection is performed during media
initialization.
• [Enter] key: shifts to the sub menu.
5.1.6 Media Width/MediaWidth menu
Set the operation of the optional winding unit.
• [Enter] key: shifts to the sub menu.
5.1.7 Winding unit menu
Sets the beginning of printing (origin) of the print data.
• [Enter] key: shifts to the sub menu.
5.1.8 Origin menu
Sets up to prevent media from sticking when printing starts.
• [Enter] key: shifts to the sub menu.
5.1.9 Prev. Stick menu
Sets up the range that the print head moves while printing.
• [Enter] key: shifts to the sub menu.
5.1.10 Head Travel menu
Sets up the overwrite count per line.
• [Enter] key: shifts to the sub menu.
5.1.11 Multi Strike menu
Sets up the waiting time while overwrite printing.
• [Enter] key: shifts to the sub menu.
5.1.12 Strike Wait menu
Sets up slanting detection during media loading.
• [Enter] key: shifts to the sub menu.
5.1.13 Slant Check menu
5-2
VJ-1204 OPERATION MANUAL
Description