MUTOH ValueJet VJ-1204 Operation Manual page 33

VJ-1204 OPERATION MANUAL
NOTE
• If the head height is set to High, "Change Head Gap Low" is displayed on the operation panel
and the procedure to turn the power OFF stops.
To restart the procedure, return the head height to Low.
4.2.5.2 When returning the print head to the original position
• All the lamps on the operation panel and the LCD monitor are turned OFF.
• The printer automatically turns the power OFF.
NOTE
• If there is a problem during turning OFF operation, a message is displayed on the operation
panel and the printer may stop operating.
If operation stops, refer to "7 Troubleshooting" and deal with the problem.
• After turning OFF the printer, wait for 10 seconds or longer to turn it ON again.
3. When not using the printer for a long period, push the media loading lever to the back.
No.
1 Media loading lever
Name
3-7
3 Before using
1