Operation Procedure Labels; Handling The Operation Procedure Labels; Location And Type Of Operation Procedure Labels - MUTOH ValueJet VJ-1204 Operation Manual

VJ-1204 OPERATION MANUAL
1.4

Operation procedure labels

Handling of operation procedure label, pasting location and type are explained.
When handling the operation procedure labels, be careful about the following points. The labels contain
the matters with which the operator should be particularly careful while operating it.
1.4.1

Handling the operation procedure labels

Be careful about the following points, while handling the operation procedure label.
NOTE
• Check whether the operation procedure label can be read. If the letters or illustrations on the label
are not clear, remove the dirt from the label.
• Use cloth, water and neutral detergent for removing dirt from the operation procedure label. Avoid
either organic solvents or gasoline.
• It is necessary to replace the label if it is damaged, lost or illegible.
If the operation procedure label has to be replaced, contact your local MUTOH dealer.
1.4.2

Location and type of operation procedure labels

The pasting location of the operation procedure label is shown in the following figure.
No.
1
1
Types of operation procedure labels
1-7
1 Safety instructions
Reference
6.1.1 Replacing ink
cartridges