MUTOH ValueJet VJ-1204 Operation Manual page 30

3 Before using
CAUTION
• Pay attention to the following points when handling the power supply plug. Any
mishandling of the power cable could cause a fire.
• Make sure that no foreign substances such as dust etc. are stuck to the power
plug.
• Make sure that the power plug is firmly inserted to the edge of the power
socket.
• When you do not use the printer for a long period, make sure to pull out the
power plug from the power socket for safety.
• Make sure to connect an earth wire to the earth connection that meets the
following standards.
• Earth terminal of power socket
• Earth wire with copper plate which is buried at 650 mm or more, deep in the
ground.
NOTE
• Contact the retail outlet of purchase if the earth connection cannot be established, or if the earth
connection is not given.
• When the power supply of the printer is ON, do not pull out the power cable from the power
socket.
Whenever the plug is pulled out from the power socket, allow one minute or more before
inserting the plug in the power socket again.
No.
1 Power plug
VJ-1204 OPERATION MANUAL
1
Name
3-4