VJ-1204 OPERATION MANUAL
5.1.1.1.5
After Heater menu
Sets up the After Heater temperature.
Set this menu to dry printed media.
NOTE
• Preset temperature of After Heater varies depending on the media.
For preset temperature of After Heater, refer to the "Recommended media list".
Setup item
After Heater
5.1.1.1.6
StandbyHeating menu
Sets up the length of time to preheat the heater while the printer is in standby mode.
Setup item
StandbyHeating
Setting
Off / <30° C> to 50° C
—
Setting
10 min to <60 min> to 240
min
—
Description
Sets up the After Heater temperature.
2
3
1.Roll media
2.After Heater
3.Print head
• [Enter] key: saves the setting and shifts to the
previous menu.
• [Cancel] key: cancels the setting and shifts to the
previous menu.
5.1.1.1 User media menu
Description
Sets the length of time to preheat the heaters.
When more than the set time has passed, each heater
turns off.
• [Enter] key: saves the setting and shifts to the
previous menu.
• [Cancel] key: cancels the setting and shifts to the
previous menu.
5.1.1.1 User media menu
5-11
5 Panel setup menu
1