Cleaning The Printer; Cleaning The Outer Case - MUTOH ValueJet VJ-1204 Operation Manual

VJ-1204 OPERATION MANUAL
6.2

Cleaning the printer

Periodic (every month) cleaning is necessary to use the printer in good condition.
WARNING
• Do not insert or drop metal or flammable objects into the printer through openings
such as a fresh air inlet. It could lead to an electric shock or fire.
• If foreign substances or liquids such as water entered the printer, do not use the
printer as it is. It could lead to an electric shock or fire. Immediately turn OFF the
power switch, disconnect the power plug from the electric socket, and contact your
local MUTOH dealer.
CAUTION
• When cleaning the printer, be sure to turn OFF the power and disconnect the power
plug.
• Do not use volatile solvents such as thinner, benzene, or alcohol. These solvents
could cause damage to the paint.
• Be careful that no moisture enters the printer. There is a possibility that the electric
circuit inside the printer is short circuited.
• Do not open covers attached using screws under any circumstances. This may
cause an electric shock or a malfunction.
This section describes how to clean each part of the printer.
6.2.1

Cleaning the outer case

This sub-section describes how to clean the outer case.
Wipe out dust and dirt attached to the outer case by using a soft cloth.
6-17
6 Maintenance