VJ-1204 OPERATION MANUAL
5.1.4
Side Margin menu
Set up the right and left margins (side margins) while printing.
NOTE
• When setting "On Media" in the Spitting menu, the value of the Side Margin menu is disabled and
the margin to perform the flushing operation is set automatically.
5.1.3 Spitting menu
Setup item
Side Margin
5.1.5
Media Initial menu
Decides whether to detect the width and front edge of the media when initializing the media.
Setup item
Init.
Setting
<3mm> to 25mm
—
Setting
Off
Top&Width
<Width>
—
Description
Set the side margins.
• [Enter] key: saves the setting and shifts to the
previous menu.
• [Cancel] key: cancels the setting and shifts to the
previous menu.
5.1 Setup menu
Description
The media is not detected.
NOTE
• Set the media width that is set in the
Media Width menu when setting "Off"
in the Media detection menu,
5.1.6 Media Width/MediaWidth
menu
Detect the media width and edge while initializing the
media.
Detect the media width while initializing the media.
• [Enter] key: saves the setting and shifts to the
previous menu.
• [Cancel] key: cancels the setting and shifts to the
previous menu.
5.1 Setup menu
5-15
5 Panel setup menu