Warning Labels; Handling The Warning Labels; Location And Type Of Warning Labels - MUTOH ValueJet VJ-1204 Operation Manual

1 Safety instructions
1.3

Warning labels

This section explains the handling of warning label, pasting location and types.
Warning labels are attached to parts of the printer that need special caution. Understand the locations
and the descriptions of the danger associated with each label before operating the printer.
1.3.1

Handling the warning labels

When handling the warning labels, be careful about the following points.
NOTE
• Check whether all the warning labels can be read. If the letters or illustrations on the label are not
clear, remove the dirt from the label.
• Use cloth, water and neutral detergent for removing dirt from the warning label. Avoid either
organic solvents or gasoline.
• It is necessary to replace the labels if they are damaged, lost or illegible.
If the warning labels have to be replaced, contact your local MUTOH dealer.
1.3.2

Location and type of warning labels

Pasting locations of the warning labels are shown in the following figure.
No.
1
Types of warning labels
1-6
VJ-1204 OPERATION MANUAL
1