MUTOH ValueJet VJ-1204 Operation Manual page 89

VJ-1204 OPERATION MANUAL
Setup item
Type 1 to 30
Setting
Print Mode
PF Adjust
Pre Heater
Platen Heater
After Heater
StandbyHeating
Vacuum Fan
—
Description
Sets up the print mode according to the usage of print
data or print speed.
• [Enter] key: shifts to the sub menu.
5.1.1.1.1 Print Mode menu
Various settings on the Media feed compensation are
configured.
• [>] key: shifts to the sub menu.
5.1.1.1.2 Dist.Adj menu
Sets up the Pre Heater temperature.
• [Enter] key: shifts to the sub menu.
5.1.1.1.3 Pre Heater menu
Sets up the Platen Heater temperature.
• [Enter] key: shifts to the sub menu.
5.1.1.1.4 Platen Heater menu
Sets up the After Heater temperature.
• [Enter] key: shifts to the sub menu.
5.1.1.1.5 After Heater menu
Sets up the length of time to preheat the heater while the
printer is in standby mode.
• [Enter] key: shifts to the sub menu.
5.1.1.1.6 StandbyHeating menu
Sets up vacuum fan operation.
• [Enter] key: shifts to the sub menu.
5.1.1.1.7 Vacuum Fan menu
• [Cancel] key: shifts to the previous menu.
5.1.1 MediaType menu
5-5
5 Panel setup menu