Gateway Menu; Front Interlace Menu - MUTOH ValueJet VJ-1204 Operation Manual

5 Panel setup menu

5.1.23 Gateway menu

Sets the gateway.
NOTE
• Be sure to set the gateway after consulting the network administrator.
Setup item
Gateway

5.1.24 Front Interlace menu

Set the front interlace function.
This function is applied when the banding appears at the beginning of print.
Setup item
Front Interlace
Setting
000.000.000.000 to
<192.168.001.254> to
255.255.255.255
—
Setting
Off
<On>
—
VJ-1204 OPERATION MANUAL
Description
Change the gateway to operate the following keys.
• [+] key: increases the setting value.
• [–] key: decreases the setting value.
• [Enter] key: changes the setting for the next segment.
• [Cancel] key: saves the setting and shifts to the
previous menu.
5.1 Setup menu
Description
The front interlace function is not used.
The front interlace function is used.
• [Enter] key: saves the setting and shifts to the
previous menu.
• [Cancel] key: cancels the setting and shifts to the
previous menu.
5.1 Setup menu
5-28