MUTOH ValueJet VJ-1204 Operation Manual page 45

VJ-1204 OPERATION MANUAL
3. Press the [Enter] key on the operation panel.
• The media type is set.
• "Media Initial" is displayed on the operation panel and media initial operation starts.
NOTE
• If the following operations are performed in the media type setup menu, the printer starts media
initial operation without specifying a media type.
• Pressing the [Cancel] key on the operation panel.
• No keys on the operation panel are pressed for 10 seconds.
4. After media initial operation is complete, "Ready to Print" is displayed on the operation panel and
the display shifts to Normal.
5. When using the roll media, wind back the roll media tightening with the scroller and the media
slackness is tightened.
2
No.
1
2
• This completes media loading.
1
Roll media
Scroller
2
Name
3-19
3 Before using